🛠️ Tuned Profile: Generic PLA
Changelog:
Nozzle Temp (Other Layers): Set to 220°C.
Reason: Optimized for better inter-layer adhesion and surface gloss on standard PLA.
Max Volumetric Speed: Increased to 15 mm³/s (Default was 2).
Requirement: Requires a high-flow hotend.
💡 Tips:
If you experience under-extrusion at high speeds, lower the Max Volumetric Speed in your slicer settings.
For PETG users: This profile also applies the 15 mm³/s limit; ensure your cooling is sufficient to prevent oozing.

· Last update: Mar 2026