PC-CF

$15.99
En stock Précommande En rupture de stock
Disponibilité : En stock Précommande En rupture de stock
  1. Exceptional Stiffness & Dimensional Stability
    Reinforced with 10% short carbon fibers, this filament delivers significantly higher flexural modulus and strength, reduced thermal expansion, and minimal warpage—ideal for large, high-precision structural components.
  2. Enhanced Heat Resistance
    Heat deflection temperature reaches 130–140°C, with continuous use above 120°C, outperforming standard PC. Suitable for under-hood automotive parts, drone frames, and other high-temperature applications.
  3. High Strength-to-Weight Ratio & Mechanical Performance
    Tensile strength increases to 70–85 MPa while retaining PC’s inherent toughness. The composite offers excellent rigidity without the weight of metal—perfect for lightweight engineering designs.
  4. Professional Printing Requirements
    Recommended settings: nozzle 270–300°C, bed 90–110°C. Must be printed in an enclosed, heated chamber to prevent cracking. Highly hygroscopic—dry at 80°C for 6–8 hours before use. Hardened steel nozzle required due to abrasive carbon fibers.
  5. Advanced Industrial & Engineering Applications
    Widely used for aerospace prototypes, racing components, robotic arms, industrial jigs, and power tool housings—where rigidity, thermal stability, and precision are critical.
Poser une question

Color: Black

Black
Royal Blue
Military Green
Gray
Comparer
Caractéristiques Spécification Contenu de la boîte Revoir FAQ

PC-CF, diamètre du fil : 1,75 mm, poids : 1 kg

 densité 1,2 g/cm³
Indice de fluidité à chaud (g/10 min) 10,5 (220 °C/10 kg)
Température de déformation thermique (°C, 0,45 MPa)  125℃
 Résistance à la traction (Z)
 63 MPa
 Allongement à la rupture (Z)
 45%
 Résistance à la flexion XY)
 125 MPa
Module de flexion (XY) 2200 MPa
Température d'impression 220-260℃
Température de la plaque inférieure 80-1420℃